Click image to view full size image
Punch Mold Press Brake Tools
Our superior craftsmanship in manufacturing press brake tools will make you to be the best fabricators in the world. Our products features designed to high endurance surface enhancement extend the life of your tooling.
Press Brake Tooling | |
Material | 42CrMo |
Heat treatment | HRC 47+/- 2° & Ground |
Package | Wooden Crate |
Delivery time | 12 - 15 workdays |
Remark:
42CrMo = SCM440 = 42 CrMo4= 4140
The Chemical Composition of 42CrMo
C | Si | Mn | Mo | Cr | S | Ni | Cu | P |
0.38-0.45 | 0.17-0.37 | 0.5-0.8 | 0.15-0.25 | 0.9-1.2 | ≤0.035 | ≤0.3 | ≤0.3 | ≤0.035 |
HRC 47+/- 2°
Cr12Mov = SKD11
The Chemical Composition of Cr12Mov
C | Si | Mn | Cr | Mo | P | S | V |
1.45~1.7 | ≤0.4 | ≤0.35 | 11.0~12.5 | 0.4~0.6 | ≤0.03 | ≤0.03 | 0.15~0.3 |
HRC60°-62
Thickness can be processed for Hot-Rolled Steel & cold rolled steel:3 - 6 mm
Other material LD = D2 = DC53 is available for us too.
Advantage of sectional tools:
1. Most tools can be easily loaded by a single operator.
2. Easy to store
3. All sectionalized tools come pre-cut in nine different pieces.
4. Most sectionalized punches include two ear pieces (horns)
5. Nitrex (HRC-70) is standard on every punch in the tooling line.
6. Special tooling available.
Punch Mold Press Brake Tools
